A first-license application is rarely rejected over duration. It is rejected over what the lines actually say: three years in the same position, the same task repeated, a logbook signed off in bulk by a shop supervisor who wasn’t there that day. The authority does not count months: it checks task coverage, a time window, and a chain of signatures it can cross-check.
Three words filter the entire file
The wording that opens the requirements fits in one line: practical maintenance experience on aircraft in service. Each of the three words eliminates an entire population of candidates convinced they were on track.
Practical excludes anything that does not pass through the hands: writing a work card, preparing a job, tracking a deadline. The job depends on it, the file does not count it. The line must describe an action performed on an aircraft, together with the documentary reference that governed it.
Maintenance excludes production and design. Assembling a new aircraft on the line or validating a change in a design office are aeronautical work, but they are not maintenance in the sense of continuing airworthiness.
In service excludes everything that does not fly: instructional airframes, salvaged wrecks, test rigs, mock-ups. The aircraft must be registered and in use, and the work must have left a trace in a record the authority will find years later. Hence the sense of unfairness in many rejected files: part of the three years simply does not fall under the definition.
The authority only counts hands-on maintenance work done on real, flying aircraft. Office tasks, new aircraft assembly, or work on non-operational airframes don’t qualify, even if they’re aeronautical jobs.
A technician who spent 3 years assembling new A320s at an airframer has no qualifying experience, even if the work is technically similar to maintenance. Only work on registered, operational aircraft counts.
Three entry paths, three durations
The required duration does not depend on the education level claimed but on the type of preparation recognized by the authority. Three regimes coexist, and moving from one to another is paid for in years.
| Entry path | Category A and piston-engine subcategories | Avionics category and turbine subcategories |
|---|---|---|
| No prior recognized technical training | 3 years | 5 years |
| Vocational training deemed relevant in a technical field | 2 years | 3 years |
| Approved basic course, completed at an approved training organization | 1 year | 2 years |
An approved basic course provides a verified foundation and supervised practical training: the authority therefore accepts a shorter time spent in service. Technical vocational training — machining, electrical engineering, composite structures — provides the hands-on skill without the aeronautical frame of reference, so the reduction is smaller.
Exams shorten nothing. Passing the modules as an independent candidate, one by one, does not entitle you to the reduced duration: that reduction is attached to the approved course and its practical training, not to holding the exam credits. A self-taught candidate who passes everything still falls under the full duration, and many discover this only at the time of filing.
Not every organization that prepares candidates for the modules is approved to deliver the basic course: this distinction decides the duration and must be checked before enrollment, not on the way out. Training programs should be compared on this point at least as much as on price.
For the category that authorizes overseeing base maintenance work, the count changes in nature: one totals years of exercising the privileges of a license already held, or years spent in a support-staff position at an approved organization.
Coverage matters more than the counter
Once the duration is reached, the examination turns to content. What is expected is a representative spread: the experience must cover the main task families, not accumulate on a single one.
These families are routine servicing and ground support, scheduled inspections, troubleshooting and rectification, removal and installation of equipment, functional and operational tests, and finally structural and materials work. Depending on the category sought, engine ground runs or digital systems are added to the list.
Two thirty-six-month logbooks are therefore treated differently. One that shows only fluid top-offs and wheel changes on the ramp will be judged insufficient. A significant share must also relate to the category applied for: accumulating avionics work when aiming for an airframe-and-engines license does not fill the right column.
That said, this is not a box-ticking exercise: a logbook artificially spread out, one line per family and nothing behind it, is spotted immediately.
The authority wants to see that you’ve done a variety of real maintenance tasks, not just the same thing over and over. You need to show experience across different task families to prove you’re ready for certification.
A technician who spent 3 years only doing ramp services (fluid checks, tire changes) on a B737 would be rejected for an airframe license because they lack experience in inspections, structural work, and other required task families.
Where experience is earned, and where it does not count
The place determines the evidence. Work performed at an approved organization leaves a work order, a job number, an identifiable certifying staff member; performed elsewhere, it must produce the equivalent, or it counts for nothing in the file.

| Environment | Usual status | What decides it |
|---|---|---|
| Approved maintenance organization, line and base | Accepted | Archived work order, identified certifying staff |
| General aviation under an independent certifying person | Accepted | Written evidence and sign-off from the person present |
| Military or state maintenance | Case by case | Correspondence of tasks with civil practice |
| Production and assembly of new aircraft | Rarely accepted | The aircraft is not yet in service |
| Rigs, mock-ups, simulators, school workshop | Not accepted | Falls under training, not experience |
| Methods, planning, stores, quality | Not accepted | No task performed on an aircraft |
The military case is the most debated: the tasks are real, but the documentary framework differs and the civil authority does not know the nomenclatures. The file hinges on the correspondence table, which should be prepared before leaving the institution, while service records remain accessible.
A simulator, however faithful, produces no maintenance experience at all: no aircraft in service, no airworthiness record, no consequence on a flight.
The type of operation shapes the logbook more reliably than the employer’s name. A ramp position in short-haul commercial air transport produces volume in routine servicing, troubleshooting under departure pressure, and equipment replacement, but almost nothing in structure or heavy testing. A chain of base checks gives the opposite: scheduled inspections, opening of zones, sheet-metal repairs, reassembly, and functional tests, with little quick turnaround troubleshooting. General aviation and aerial work cover the widest range, engines included, but leave the most fragile trace for lack of as well-equipped a recording system. Many logbooks judged unbalanced come from a career path that is perfectly coherent professionally, but built on only one of these three sides.
Mobility, on the other hand, opens up the logbook. Reinforcement assignments, on FL330’s freelance platform for example, give access to task families that a fixed position will never present.
The ten-year window, and the recency requirement
Experience expires. The window commonly applied is the ten years preceding the application: beyond that, experience no longer counts, even if perfectly documented, even if signed off by an impeccable certifying person. This is the first point to check with the authority that will process the file, because it alone decides the fate of the early career years.
Recency works the other way. A first issue assumes a recent period of experience on aircraft of the category applied for, roughly one year, right before filing. Someone who trained in airframe and engines and then spent two years in avionics will need to rebuild it on the right side.
For adding a category or subcategory to a license already held, the required recent duration is proportional to the gap between what is held and what is applied for; the floor remains on the order of a few months.
A long career is trapped by the left edge. A technician who started very young and stayed ten years in the same position before deciding to apply sees the early years — often the most varied — drop out of the window at the very moment the file is being built. Every month of delay erases another one at the far end.
Your experience must be recent – within the last 10 years – and you need to have done relevant work in your target category recently (usually within the last year) before applying.
A technician who worked on airframes for 8 years, then switched to avionics for 3 years, would need to do 12 months of airframe work before applying for an airframe license, even if their total experience is 11 years.
The logbook: what a line must carry
No format is mandated, but the document’s function is: to allow a third party to verify without you present. A usable line carries the date, the registration and type of the aircraft, the system involved, the task worded as an action verb, the work order reference, the role held, and the witness’s sign-off.
The role held is the most neglected and most closely read column. Performed alone, performed under supervision, assisted, observed do not carry the same weight: observing is not performing, and the authority weighs this. Conversely, a logbook where everything was performed alone early in the career describes an organization that lets an unlicensed person work without supervision.
Keep the logbook day by day, and have it signed off monthly. A line written the same evening carries the exact work order reference; reconstructed two years later, it carries only a memory. Have it countersigned in short periods, keep a copy outside the company, and note the witness’s name, role, and license number: by the time you file, they may have changed employer.
The signatory: what their sign-off asserts, and what it does not say
This is the most misunderstood point, and the one that exposes the professional handed a pen at the end of a job.
The witness’s sign-off is a statement of fact: this person declares having observed that the described task was performed by the candidate, on the date and in the role indicated. It is neither a judgment of competency, nor an approval for release to service, nor a commitment regarding issuance.
The signatory must have been in a position to see. The hierarchical link is not the condition, presence is: the certifying person on the job, the team supervisor, the tradesperson overseeing the position are legitimate; the department head who discovers the logbook six months later is not.
The organization adds something else: an attestation of period and position, which does not go down to task level and therefore does not replace line-by-line sign-offs.
A favor sign-off is not a consequence-free gesture. The authority cross-checks dates against work records and aircraft downtime; an inconsistency contaminates the entire file and puts the signer’s own license at risk. One signs off only what one has actually seen, period by period.
Signatures in your logbook just prove you did the work – they don’t guarantee you’ll get certified. The person signing must have actually seen you do the work, not just be your boss.
If a supervisor signs off work they didn’t personally witness, the authority might reject the entire logbook and investigate the supervisor’s license for improper sign-off.
Basic experience and on-the-job training: two separate accounts
The license issued at the end of this path still carries no type qualification. For the first entry of a type in airframe-and-engines or avionics, on-the-job training is added: a list of tasks imposed by an approved program, execution on the aircraft, dedicated recording, evaluation by a designated person.
This file lives apart and does not substitute for basic experience. The frequent error is to enter the same interventions into both logbooks: they almost never satisfy both criteria at once, one requiring specific tasks on a specific type, the other requiring variety.
What to check before filing
The file is prepared upstream, not while filling out the form. Five checks avoid most rejections.
- Go through the logbook column by column and count the families covered, not the lines.
- Place the filing date on a timeline and see what falls outside the ten years.
- Check recency against the category being applied for, not against what you are doing today.
- Make sure every witness remains reachable and that their role at the time is documented.
- Cross-check a few dates yourself against the work orders: otherwise the authority will do it for you.
A gray area remains, to be handled in writing rather than by assumption. The crediting of the practical portion of an approved course, the treatment of military experience, the acceptance of time spent in production fall under the authority’s judgment and vary from one state to another. A request for a prior opinion costs a letter; the same question asked after filing costs the file.
The applicable regulation, the acceptable means of compliance published by the authority, and the organization’s approved documentation prevail over this article, whose only purpose is to explain how the mechanism works.
Questions fréquentes
Does passing the exam modules as an independent candidate reduce the required experience duration?
No. The reduced duration is attached to completing a basic course at an approved training organization, practical training included, not to holding exam credits. A self-taught candidate, even one who passes every module, remains subject to the full duration. This is the most costly misunderstanding in the process, because it is discovered only at the time of filing.
Does experience gained during an apprenticeship count?
Yes, for the portion carried out on aircraft in service within a traceable maintenance environment, and provided it was signed off. The portion done in the school workshop does not count, for lack of an aircraft in service. Also watch the ten-year window: an old apprenticeship may have partly dropped out of the count by the time of filing.
Who can sign off a line in the experience logbook?
A person who actually observed the described task being performed, on the date indicated: the certifying person on the job, the team supervisor, or the experienced technician overseeing the position. That person must be identifiable by name, role, and, where applicable, license number. The hierarchical link is not the condition; presence is.
Is military experience accepted for a first civil license?
It is examined case by case. The authority looks for correspondence between the tasks performed and the civil practice’s task families, as well as supporting documents it knows how to read. The conversion should be prepared before leaving the institution, while service records and logs remain accessible.
Does the experience logbook also serve for the first type rating?
No, these are two separate files. Basic experience leads to the license without a type qualification; the first entry of a type in airframe-and-engines or avionics goes through on-the-job training, with its own task list, recording, and evaluation. Entering the same interventions in both files does not make them count twice.
How long does an experience logbook remain usable?
The experience must have been gained within the ten years preceding the application, which makes an old logbook progressively unusable. At the other end, a period of recent experience in the category applied for is expected right before filing. A file compiled and then set aside for two years can fail on both ends at once.

Leave a Reply
You must be logged in to post a comment.