Holding in en-route airspace is a maneuver where an aircraft flies a racetrack-shaped pattern over a specific point, typically a navigational aid, to maintain position while waiting for clearance or to manage traffic flow.
This is done by flying a series of straight legs and turns, usually at a specified altitude and speed, to ensure the aircraft remains within a designated holding area. The pattern typically consists of an outbound leg, a turn, an inbound leg, and another turn, repeated until the aircraft is released from holding.
For pilots, this changes their flight path from a direct route to a controlled loop, requiring precise navigation and adherence to published holding procedures. It also affects fuel consumption and flight time, as the aircraft burns additional fuel while maintaining the holding pattern.
For example, if an aircraft is instructed to hold over a VOR at 10,000 feet, it might fly a 1-minute outbound leg, a 180-degree turn, a 1-minute inbound leg, and another 180-degree turn, repeating this until cleared to proceed.
The controller instructed the pilot to enter a holding pattern in en-route airspace due to congestion at the destination airport.