Two aeroplanes leave the same final assembly line in the same month, accumulate roughly the same hours, and reach the used market together. One trades at a price the other cannot approach. Age explains none of it. What explains it is a set of independently clocked maintenance positions — engine time remaining, life-limited part lives, heavy check status, gear and auxiliary power unit clocks — and the credibility of the paperwork proving them. An appraiser is not pricing an aircraft but the distance to its next expensive event, discounted by how far the supporting numbers can be trusted.
What is actually being traded
An aircraft on the secondary market is not one object in one condition. It is a bundle of separately clocked assets that happen to share a registration, and several may not even share an owner. Engines are frequently owned or leased apart from the airframe. The auxiliary power unit runs on its own hour counter. Each landing gear leg carries its own overhaul date. The airframe advances through a check cycle measured in flight hours, flight cycles and calendar time simultaneously, whichever comes first. Inside each engine sits a stack of life-limited rotating parts, each with its own remaining cycles, none of which can be repaired back to zero.
What a buyer purchases is therefore not condition. It is time before spending. The question behind every used-aircraft negotiation is how many months of revenue service stand between the transfer of title and the first invoice that has to be paid to keep the asset flying. Two aircraft of identical vintage can sit at opposite ends of that scale, and the difference is not a subtlety of grading: it is the price of a full engine shop visit, which on large turbofans runs into millions.
Age enters the calculation on a different axis, and confusing the two is the commonest error in reading a listing.
The vocabulary appraisers use, and why it is deliberately precise
Professional appraisal bodies define their terms tightly, and the definitions are worth learning because they encode exactly the separation described above. A published value for a type and vintage is not a statement about any particular aircraft; it is a statement about a hypothetical one, held in an agreed reference condition, so that the specific aircraft can then be priced by explicit adjustment.
The reference condition most often used is the half-life convention: every maintenance position is assumed to stand at precisely half of its interval. That assumption is not a guess about the fleet average. It is a bookkeeping device. Its entire purpose is to strip the maintenance status out of the base figure so that it can be added back, line by line, as a maintenance adjustment that both parties can argue about with a spreadsheet rather than an opinion.
| Term | What it means | Why it exists |
|---|---|---|
| Base value | The appraiser’s opinion of the underlying economic worth of the type and vintage, in a balanced market, assuming a reference maintenance condition | Removes short-term market noise so that long-term financing decisions have a stable anchor |
| Current market value | The most likely trading price today, given actual supply, demand and lessee appetite for the type | What a transaction is actually negotiated against |
| Half-life | Every maintenance position assumed to be exactly halfway through its interval | Isolates the maintenance status so it can be priced as an explicit, arguable adjustment |
| Maintenance-adjusted value | The reference value plus or minus the value of the actual status of each position | The only figure that describes the specific aircraft in front of you |
Notice what this implies. When a market report values a fifteen-year-old aeroplane of a given type, that figure applies to no aircraft anywhere: it applies to an accounting fiction at half-life. The real tail is that figure plus or minus the maintenance ledger, and the ledger moves the number by a proportion that astonishes anyone thinking in terms of car depreciation.
Engine status: green time is the currency
The single largest line in that ledger is almost always the engines. A modern high-bypass turbofan is not maintained on a fixed overhaul schedule; it is maintained on condition, and the condition that governs removal is usually the exhaust gas temperature margin. Every takeoff at high thrust erodes it slightly, at a rate that depends on the derate policy, the sector length, the airport elevation and — heavily — on the abrasiveness of the air the engine breathes. When the margin is exhausted, the engine can no longer reach its rated thrust on a hot day without exceeding a certified temperature limit, and it comes off the wing.
The time remaining before that moment is called green time, and it is what a buyer is really acquiring. An engine with substantial green time is an asset generating revenue with no near-term claim against it. An engine close to removal is a liability with a date attached, and the invoice for a performance restoration shop visit on an ageing type can approach a meaningful fraction of what the whole aeroplane is worth on the market. That single fact is why the residual value curve of an airliner is not a smooth decline. It is a sawtooth, dropping toward each shop visit and recovering after it, superimposed on a slow underlying decay.
This also explains a practice that puzzles outsiders: lessors deliberately fitting engines with modest remaining life to aircraft in their final years. If the airframe has three years of economic life left, an engine with three years of green time is the right asset to hang on it.
The trap. « Recently overhauled » is not information. A shop visit is defined by its workscope, and workscopes range from a limited module repair to a full performance restoration with a complete replacement of the life-limited stack. Two engines both described as freshly out of the shop can differ by most of the cost of a new engine. The question is never whether it went to the shop; it is which modules were opened, what was restored, and which life-limited parts came back with new cycles.
The value of an aircraft depends more on how soon its engines will need expensive repairs than on how old it is. Engines are the most expensive part, and their “green time” (time before they need work) is what really matters. If an engine is close to needing repairs, the whole plane is worth much less, even if it’s not very old.
A 10-year-old Airbus A320 with engines having 5,000 hours of green time might sell for $25 million, while an identical aircraft with only 500 hours of green time could sell for about $21 million. The gap of around $4 million is roughly the cost of an engine shop visit, which can be $3-5 million.
Life-limited parts: the stack that cannot be repaired
Inside the engine sits a group of rotating components — discs, spools, shafts, seals and hubs — whose failure would not be contained by the casing. For these, the certification basis does not permit an on-condition philosophy. Each carries a certified life expressed in cycles, published in the airworthiness limitations section of the instructions for continued airworthiness, and that life is a hard limit. It cannot be inspected away, repaired away or extended by good behaviour. When the cycles are consumed, the part is scrapped, whatever its apparent condition.
The consequences for value are severe and frequently underestimated. The life-limited stack can dominate the cost of a shop visit. Worse, the parts have unequal remaining lives, so a single component with few cycles left effectively contaminates the whole module: since the module must be opened to reach it, the economic logic pushes toward replacing everything nearby at the same time rather than paying twice for the same disassembly. A well-managed engine has its life-limited parts loosely aligned so that the replacements fall together on a planned shop visit. A badly managed one forces an unplanned second entry, and the market prices that difference precisely.
Each of these parts also carries a documentation requirement that has no equivalent elsewhere in the aircraft: back-to-birth traceability. The complete cycle history from manufacture must be provable. A part whose history has a gap is not a cheaper part. It is, for most buyers, a scrap part, because the missing cycles must be assumed to be the maximum.
Airframe, gear and auxiliary power unit: the events with dates on them
Around the engines sit the positions that are easier to read because they are calendar-anchored. The airframe moves through a maintenance programme whose heaviest checks fall at intervals measured in years. The aircraft earns nothing meanwhile, and the operator pays for a hangar slot, a workforce and whatever corrosion and fatigue findings emerge once the panels are open. The findings are the uncertain part; the slot is merely expensive.
Landing gear overhaul falls on a type-specific interval, normally calendar-based, and because a gear overhaul is usually accomplished by exchanging the assemblies, its value is straightforward to compute and straightforward to argue about. The auxiliary power unit runs on its own hours and is often on a separate support agreement. Overlaying all of it is the modification status: outstanding airworthiness directives, service bulletins the buyer’s authority or operator will insist on embodying, avionics standards driven by airspace mandates, and cabin equipment that has to meet the new operator’s expectations. Each of these is a cost the buyer will incur, and each is therefore subtracted from what the buyer will pay.
One further limit does correlate with age and does put a real ceiling on the asset. Ageing-aircraft rules attach a limit of validity to the structural maintenance programme, expressed in flight cycles or flight hours, beyond which the programme no longer demonstrates freedom from widespread fatigue damage. Extending it is a design-approval exercise, not a maintenance one, and on a high-cycle short-haul airframe that ceiling can arrive well before the aeroplane looks tired.
The records are part of the asset, not a description of it
It is tempting to treat the documentation as evidence about the aircraft. In the used market it is closer to being a component of it, with its own value and its own irreparable defects. A record set that is complete, indexed and internally consistent shortens a transaction by weeks. One scattered across three previous operators and two registries can make a sound aeroplane effectively untradeable at any price the seller will accept.
A buyer’s technical inspection converges on the same elements everywhere: the authorised release documentation for installed components, with dual release where the aircraft changes authority; the damage history and the approval data behind each repair; the compliance status against directives and bulletins; and the traceability of every life-limited part. Missing paperwork behaves like a defect maintenance cannot cure — the only remedies are a discount or physically replacing the component whose history is unprovable.
The right reflex. Before any conversation about price, ask for three documents: the life-limited part status sheet for each engine, the workscope report from the last shop visit, and the current status of the maintenance programme against the aircraft’s actual hours, cycles and calendar. Those three describe most of the value. A photograph of the cabin describes almost none of it.
What age genuinely explains
None of this means age is irrelevant. It means age acts on a different mechanism. Maintenance status determines what this aircraft is worth relative to its twin. Age determines what the twins as a class are worth, and it does so mostly through demand and financing rather than through condition.
| Driver | Acts through | What it moves |
|---|
Read that way, the paradox dissolves. Age explains why a vintage as a whole is cheaper. It explains very little about why two aircraft from that vintage are priced differently — and it is that second gap which surprises people.
When the parts are worth more than the aeroplane
Every airframe eventually reaches a point where the next major maintenance event costs more than the market will pay for the flying asset that emerges from it. The aircraft then ceases to be an operating asset and becomes an inventory of components, and the transition is decided by exactly the arithmetic above: an engine near removal, a heavy check due, a gear overhaul in the same window, and a lease market that no longer wants the type.
Teardown value is dominated by the same items that dominated operating value. The engines, and specifically their life-limited parts and repairable modules, carry most of it; landing gear assemblies, the auxiliary power unit and certain avionics follow. The bare hull is close to scrap. The used serviceable material market that results is not marginal — it keeps the operating cost of an ageing fleet tolerable, and puts a floor under the residual value of every remaining aircraft of the type. A type with no teardown market ages far more brutally than its engineering deserves.
Reading a listing like an appraiser
The practical translation is a short set of questions that reorder any conversation about a used aircraft. How many cycles of green time remain on each engine, and what is the exhaust gas temperature margin trend rather than its current value? Where does the lowest life-limited part sit, and does it align with the next planned shop visit or force an extra one? When do the heavy check, the gear overhaul and the auxiliary power unit fall, and do they fall together? Is the record set complete enough to obtain a certificate of airworthiness in the intended registry without a reconstruction exercise? And only then: how old is it?

Asked in that order, the price differences that look irrational from the outside become almost arithmetic. Asked in the reverse order — age first — the buyer ends up negotiating hard over the one variable that explains the least. Fleet planners, technical buyers and lease managers who compare notes on type-specific maintenance economics will find plenty of it discussed in the FL330 community, but the discipline itself is portable: price the next invoice, not the birthday.

Leave a Reply
You must be logged in to post a comment.