circuit (CIRCLING)

A circuit, or circling approach, is a standard procedure used when a direct straight-in approach to the runway is not possible. Instead of flying directly to the landing threshold, the aircraft follows a curved path, typically in a series of turns, to align with the runway.

The pilot must maintain a stable descent rate and airspeed while maneuvering, ensuring the aircraft remains within the protected airspace around the airport. This requires precise coordination of throttle, flaps, and control surfaces to maintain the correct glidepath and avoid overshooting or undershooting the runway.

For example, if the wind is blowing from the east and the runway is oriented north-south, the pilot might fly a left-hand circuit, making a series of turns (e.g., a 45-degree entry, base leg, and final approach) to align with the runway. The circuit pattern typically includes a downwind leg, base leg, and final approach, with the aircraft descending gradually to the landing threshold.

The circuit changes the pilot’s workload significantly, as it requires constant monitoring of the aircraft’s position, speed, and altitude while making controlled turns. It also affects traffic flow, as multiple aircraft may be holding in the circuit pattern before landing.

The controller instructed the pilot to enter a left-hand circuit for Runway 27 due to crosswind conditions.

Découvrez l’écosystème FL330

FL330, c’est toute l’aviation professionnelle — explorez nos autres espaces.