Failing a Periodic Check: The Chain Between Examiner, Operator and Authority

Banc désert dans un couloir devant une porte de salle de briefing fermée, tasse en carton au sol

Four hours of simulator, a debriefing longer than usual, and a phrase the examiner must state plainly: a section is not passed. At this moment, a three-player mechanism — examiner, operator, authority — is set in motion, with a non-negotiable order of operations. What the pilot can resume, and when, depends neither on their planning nor on the goodwill of their hierarchy: it depends on the nature of the failed check and the extent of the failure. This is the chain that is dismantled here, link by link.

What the examiner observes — and what their observation triggers

The examiner is not a sanctioning body: they observe, and their observation is a formal act from which everything else follows. First obligation: announce the result to the candidate without delay, in session, never via a delayed message. The debriefing that follows is not a post-flight courtesy; it is part of the check. This is where the sections considered not passed are set, the observed facts that support the observation, and the expectations of the re-check. A pilot who leaves the room without knowing exactly which sections are at stake is already off to a bad start: the entire return path is calculated from this record.

Second consequence, silent but decisive: the revalidation certificate is not signed. The revalidation of a type rating is materialized by an act of the examiner; as long as the check is not passed, this act does not exist, and nothing is transferred to the license. Third consequence: the written report. The examiner transmits the result of the check to the competent authority according to the circuit provided by the crew regulations — including, and especially, in case of failure. This report feeds both the file of the holder and the supervision of the examiner system, whose standardization partly relies on the analysis of these documents.

The extent of the failure then determines the recovery regime. In general, a failure limited to a single section is repeated in that section, without redoing the rest; a failure affecting multiple sections requires retaking the full check; and a new failure during recovery, in principle, requires certified additional training before any new attempt. The exact cutoff corresponds to the regulatory annex dedicated to practical tests and competence checks — it is this, and the examiner’s record, that serve as reference, not the memory each retains of the session.

The examiner’s role is to observe and report, not to punish. A failed check triggers a strict process: the pilot can’t exercise the privileges concerned until they retake and pass the failed sections. The examiner’s report is key—it goes to the operator and the authority, which uses it to monitor safety; nothing is endorsed on the licence for a failed check.

A Boeing 737 pilot fails the LPC on a single section (e.g., emergency procedures). They must retake only that section, but if they fail again, they’ll need extra training before another attempt. The examiner’s report goes to the aviation authority, and the pilot can’t fly until they pass.

Two parallel regulatory chainsLicense chain: type rating, competence check, examiner’s signature. Operations chain: manual, offline check, operator’s file. A dotted line separates them, with no bridge.License axis — follows the pilotRatingCompetence checkTitle signatureOperations axis — remains with the operatorManualOffline checkOperator’s fileNo automatic bridge from one chain to the other
Two chains that do not touch. Examiner’s signature on the licence on one side, entry in the operator’s file on the other: neither of the two outcomes produces the effect of the other.

LPC or OPC: two failures that do not suspend the same thing

The same simulator session can serve two masters, and that is the source of the most widespread confusion. The revalidation check — the LPC — falls under the license domain: it conditions the validity of the type rating, under the crew regulations. The operator’s offline check — the OPC — falls under the operations domain: it conditions the ability to be assigned in operations with this company, under the air operations regulations and the operations manual. Two distinct legal chains, two suspension logics, two return paths.

Practice mixes them up: the operator’s check schedule is typically semi-annual, and one of these dates often coincides with the revalidation check of the rating. A combined session that fails hits both chains at once — and that is precisely why, after a failure, the exact framework of the session must be established first: LPC only, OPC only, or combined. The answer is in the check record, not in the memory of it.

LPC failure and OPC failure: two distinct regimes
LPC — rating revalidation OPC — operator’s check
Legal framework crew regulations, licenses section air operations regulations, operator’s organization section
Who conducts the check type rating or simulator examiner, authorized by the authority checking personnel authorized within the operator’s approved framework
What a failure suspends the exercise of the privileges of the rating in question, everywhere assignment in operations with this operator, and only this one
Who is informed the candidate without delay; the issuing authority via report the designated training manager; the authority via operator’s oversight
Return path retake of failed sections; additional training after a new failure operator’s manual retraining program, then re-check
Record kept report to the authority’s file; no certificate until the check is passed operator’s training file, management system data

The asymmetry is clear: the LPC failure suspends the exercise of the privileges of the rating in question, everywhere and in any flight framework; the OPC failure only suspends assignment in operations with the operator in question. The other ratings held by the license are not affected in any case.

Two validity cycles over twenty-four monthsGraduated axis from 0 to 24 months: the type rating in two 12-month blocks, the offline check in four 6-month blocks. Deadlines align at 12 and 24 months, where the combined session becomes possible.Type rating — 12-month cycleOffline check — 6-month cyclealigned deadlines: combined session06121824months
Four operator checks for two revalidations. The typical semi-annual cycle of the operator crosses the annual cycle of the rating; deadlines align every other time and open the combined session. The triangles mark the exercises.

With the operator: get out of the schedule, return in order

The removal from the schedule is not a managerial decision: it is a mechanical consequence. A pilot whose required check is not passed is not assignable in operations. The crew scheduling service only records a status, and there is no disciplinary sanction or opportunity assessment there — which, from the perspective of a just culture, changes everything: one is not sanctioned for a check failure, one organizes its treatment.

The treatment, precisely, has a responsible party: the designated head of crew training. It is they who analyze the session recording, build the retraining based on the program described in the training section of the operations manual, and target the sections in question rather than giving a full course. The volume depends on the extent of the failure: short recovery in the simulator for an isolated section; a heavier sequence — ground, simulator, possibly supervised flight — when the failure is extensive or repeated. Then comes the re-check, and only after that the return to assignment.

The order of the steps is imposed, their duration is not: from a few days for an isolated section treated quickly, to a few weeks when the simulator must be rescheduled, an instructor mobilized, and a full check retaken. The availability of simulator slots is often the real limiting factor — a parameter that the pilot almost always underestimates when leaving the session, and that the head of training, on the other hand, knows by heart.

The imposed sequence of the return to lineChronological timeline in six steps along a pointed axis: failure, debriefing, analysis and program, retraining, re-check, return to line. A band above the axis covers the period between the failure and the re-check: the pilot is not assigned to line during this time. The total duration ranges from a few days to a few weeks.not assigned to lineFailureDebriefingAnalysis and programRetrainingRe-checkReturn to linetotal duration: on the order of a few days to a few weeks
The return to line is an imposed sequence, not an improvised revenge in the simulator. Each step conditions the next, and the upper band materializes the period of non-assignment, which only closes with a passed re-check.

What the authority sees — and when

On the license side, the authority is not informed by rumors: they receive the examiner’s report, failure included. This flow feeds two distinct supervisions: that of the holder — the license file retains the record of checks and their results — and that of the examiner system, whose homogeneity is partly verified through these reports. An isolated failure does not require any particular action from the authority on the license: the recovery mechanism is already written in the regulation, and it is executed without intervention.

On the operations side, there is no systematic individual report for an OPC failure. The authority sees this aspect through its continuous supervision of the operator: audits of the training system, review of files, data from the safety management system. What they look for is not the name of a pilot, but the health of the system: recurring failures in the same section, with several crews, say a lot about the training program — and it is the program that will be held accountable, not the individuals. That is also why a serious operator analyzes their check results as collective data before the authority does it for them.

Two failures, two consequencesOn the left, failure of the competence check: retraining, then new check with an examiner; the effect impacts the title. On the right, failure of the offline check: removal from line, retraining with the operator; the effect impacts employment.Proficiencycheck failedRating not revalidated,retrainingNew checkwith an examinerThe effect impacts the titleOff-line checkfailedRemoved from line flyingby the operatorRetraining under theoperator's programmeThe effect impacts employment
Two failures, two repairs. One is repaired with an examiner, the other in the operator’s program; neither of the two paths settles the other.

What the pilot can — and cannot — resume immediately

This is where the mechanism becomes counterintuitive. After a failure in the revalidation check carried out before the expiration of the rating, the license still displays a formally valid rating — the date has not been reached. And yet the exercise of privileges is suspended until the success of the check: the right to exercise follows the result of the test, not the printed date. Administrative validity and the right to exercise are two distinct objects, and only the latter governs what can be done the next morning.

The trap: relying on the date printed on the license after an LPC failure. The rating still appears valid for several months, but its privileges are suspended until the check is passed. Flying in this interval constitutes an exercise without privileges — with what that implies in terms of insurance, liability, and consequences from the authority. The useful verification does not concern the date: it concerns the result of the last check.

The scope of the suspension deserves to be stated with the same precision. The LPC failure affects the rating in question, not the entire license: another valid rating held by the same license remains exercisable. The OPC failure, on the other hand, does not affect the license at all: it makes the pilot non-assignable with the operator, and only there. Between the two, the combined check combines the effects — and requires satisfying both return paths, that of the crew regulations for the rating and that of the operations manual for the assignment. As for the case where the rating expires before retaking the check, the regime changes: it is no longer a revalidation but a renewal, with the dedicated procedure that this implies.

Displayed validity vs. real right to exerciseMatrix with two entries: in columns, passed or failed check; in rows, rating still valid or expired in the meantime. Passed and valid: renewal acted, normal flight. Failed and valid: privileges suspended despite a still valid card, this is the trap case. Passed and expired: renewal according to the dedicated procedure. Failed and expired: prior training then full check.passed checkfailed checkstillvalidexpiredin the meantimerevalidation donenormal flightprivileges suspendeddespite a still-valid cardrenewalaccording to the dedicated procedureprior trainingthen full check
The top right box is the practitioner’s trap: a formally valid rating no longer authorizes anything after a failure. The right to exercise follows the outcome of the check, never the date printed on the license.

The right reflex: before leaving the center, have three things clarified in writing — the exact framework of the session (LPC, OPC, or combined), the list of non-passed sections, and the planned recovery circuit. Then reread the chapter of the operations manual dedicated to retraining after failure. The return path is in these two documents; everything else is hallway conversation.

Failure as data: file, EBT, and preparation for return

What remains of a failure is a file — and one must know what it contains. With the operator: the session recording, the retraining program followed, the re-check and its result, kept in the training file according to the planned durations. With the authority: the examiner’s report. Nowhere: a mention on the license itself. A failure followed by documented retraining and a successful re-check is a training event handled in accordance with the system — it is the repetition, or the lack of treatment, that constitutes a signal, not the isolated event.

Two men in a cockpit at night review a document and a tablet, with one pointing at the screen.
Collaboration ensures compliance during safety checks.

Evidence-based training programs — the EBT — actually shift the question. When the operator has moved its recurrent checking into this framework, the evaluation reasons in terms of competencies rather than successful or failed maneuvers: insufficient performance triggers targeted training on the root competency, in the same module, rather than a binary cutoff. The underlying logic does not change — one does not return to line until the level has been demonstrated — but the vocabulary of failure fades in favor of that of development. For those aspiring to a position, the exact structure of the future operator’s checking system is worth studying even before entering training: it is one of the classic blind spots of preparation for a rating.

Each person still has a verification task that this article cannot do: open the training section of their operations manual and find three answers — who decides the content of the retraining, who signs the return to assignment, and what the text exactly provides for a failure in a combined check. This is the area where manuals differ the most from one operator to another, and where one discovers, always too late, that the local procedure adds steps that the regulation does not impose. Better to read it on a quiet planning afternoon than on a difficult debriefing morning.

A synthesis article cannot replace either the regulation or the manual: the applicable texts in their current version and the operator’s approved documentation prevail over what precedes, and, for each concrete case, the examiner’s recording and the decisions of the competent authority are authoritative.

Commentaires

Leave a Reply

Découvrez l’écosystème FL330

FL330, c’est toute l’aviation professionnelle — explorez nos autres espaces.