Sustainable aviation fuel: how the declared reduction is tracked to the flight

Parc à carburant d'aéroport à l'aube, réservoirs en acier, tuyauteries et point de prélèvement givré

The fuel uplift receipt that goes back to the station indicates a volume, a density, and compliance with the specification. It will never say whether the fuel on board is sustainable, and that’s normal: the molecule that burns in the engine is almost never the one that came out of the production unit. The reduction doesn’t flow through the pipe; it flows through an account. The question is who holds this account, over what scope, over what period, and what prevents it from being double-counted.

What reaches the wing is kerosene, and nothing else.

From the aircraft’s perspective, a sustainable aviation fuel is not a new fuel: it’s a product designed to be indistinguishable, which the industry refers to as a drop-in replacement. The pathways are approved one by one, in the form of annexes to the specification for fuels containing synthesized hydrocarbons: hydroprocessed esters and fatty acids, Fischer-Tropsch-type synthesis, alcohol-to-jet conversion, and isoparaffins from fermentation. Each annex sets a composition, a test battery, and a blending limit ranging, depending on the pathway, from one-tenth to half the volume.

The decisive point comes next. Once blended with conventional fossil kerosene and released for acceptance testing, the product is reclassified: it becomes standard turbine fuel, under the meaning of the civil specification and the British defense standard used on many European platforms. From that moment on, there is no longer any sustainable fuel in the physical sense. There is only compliant kerosene, poured into the same storage, the same pipeline, and the same hydrant as the rest.

This reclassification explains most of the misunderstandings. The operator has no dedicated tank downstream of the blend, no special refueling procedure, no flight restrictions, and no different performance calculations. The quality documents accompanying the delivery—batch analysis certificate, acceptance note, delivery receipt—certify a quality and quantity. None of them carry a sustainability attribute, because sustainability is not a property of the fluid: it’s a property of its history.

When sustainable fuel is mixed with regular fuel, it becomes indistinguishable. The sustainability claim isn’t about the actual molecules in the tank, but about accounting records that track how much sustainable fuel was added to the system.

An A350 operating from Paris to New York might receive 10,000 kg of fuel at the hydrant. Only 2,000 kg of this is from sustainable sources, but you can't tell which molecules are sustainable. The airline's sustainability claim comes from accounting records, not from testing the fuel itself.

Break in the physical trail between production and the wingHorizontal chain with five points: production, blending, depot, hydrant, wing. The batch remains identifiable up to blending; beyond that, it is poured into the common jet fuel and the physical trail stops. An arc drawn above the chain links production to the wing: this is documentary attribution, which crosses the break while the fluid itself is diluted.attribution documentaireproductionblendingdeposithydrantaileend of the physical trailidentified batchfungible jet fuel
The certificate crosses what the fluid cannot. Downstream of blending, no sample can tell the batches apart: this is exactly where the evidence stops being physical and becomes accounting.

Mass accounting replaces the pipe.

The international standard on control chains describes several models, and aviation uses three. Identity preservation and segregation keep the batch separate until the end user: feasible for a dedicated truck delivery or test, but absurd once the fuel enters a common network. Mass balance allows physical blending but requires the account to balance. Full decoupling, where the attribute is bought without the product, lets the certificate travel alone.

Mass balance works on two contractual boundaries. A scope is defined, which can be a site, a depot, or a logistics network, and an accounting period. Inputs are recorded with their attributes, outputs with their declarations, and at the close, the sum of certified declared outputs cannot exceed the sum of certified inputs, adjusted for conversion yields. The balance can never go negative: you don’t sell first to justify later. Unused credits roll over according to the scheme’s rules, usually within a short window, or they expire.

Mass balance rule over a scope and a periodA frame represents the accounting scope and its period. Two flows enter on the left, one certified and one ordinary; they mix in the same tank shown as a bar of which only a fraction is filled. Two flows leave on the right, one declared certified and the other ordinary. The rule written at the bottom states that the sum of certified outputs cannot exceed the sum of certified inputs.scope and periodcertified inputordinary inputcertified sharesame tank, same moleculesdeclared outputsortie ordinairecertified outputs ≤ certified inputs
Mass balance does not track a molecule; it balances an account. Everything depends on two contractual choices: where the boundary of the scope lies, and when the period closes. A balance not used at closure can only be carried over under the scheme’s rules.

The shift in logic is deeper than it appears. In a physical chain, control is over a sample; in an accounting chain, it’s over a register and an auditor’s ability to redo the math. That’s why irregularities never take the form of adulterated fuel: they take the form of a double-issued attribute, a retroactively expanded scope, or a feedstock reclassified as waste to capture a more favorable life-cycle value.

Three chain-of-custody models applied to aviation fuel
Model What physically flows What the certificate proves Weak point to watch
Segregation The certified batch stays separate until fuelling That the fuel delivered is indeed the fuel that was produced Logistics cost; incompatible with a shared hydrant network
Bilan massique Mixing allowed within a scope and a period That an equivalent quantity entered the scope Scope boundary, closing date, carry-over of balances
Decoupled attribute No link: the product and the certificate follow two routes That a quantity was produced and delivered somewhere on the market Single issuance and acceptance by the target scheme

The producer is audited by a certification scheme recognized by the regime to which the reduction will be presented: schemes approved under the international aviation carbon offsetting scheme on one side, and those recognized by the Union for renewable fuels on the other. Recognition is not generic: a scheme may cover one regime and not the other, making the same ton eligible here and unusable there.

Each batch leaves the unit with a proof of sustainability stating the nature and origin of the feedstock, the conversion pathway, the mass, the life-cycle emission value and the method that produced it, and finally the compliance regime targeted. At each change of ownership, a transfer declaration repeats these attributes exactly; the intermediary keeps its own mass balance and is audited on the same basis as the producer. A non-certified link breaks the chain, even if it only resold the paperwork.

At the end of the chain, the supplier issues a nominative declaration to the operator: quantity, delivery airport, reference period, reduction value, and targeted regime. This is the only document the operator includes in its annual emissions report, which is checked by an accredited verifier before submission to the authority. National registries and the Union’s database are specifically designed to prevent the same attribute from being issued or consumed twice.

The trap. The fuel uplift receipt proves nothing but a quantity and a quality, and a flight presented as operated on sustainable fuel statistically contains almost none of it. The real risk lies elsewhere: two departments of the same company may claim the same ton, one for its customer’s balance, the other for compliance in the annual report. Neither sees the other, and the inconsistency only appears at the supplier’s audit, often a season later, when the declarations have already been filed.

What the reduction is worth, and where it is counted.

The reduction is a life-cycle balance, not an exhaust measurement. At equal energy released, the engine emits practically the same amount of carbon dioxide, whether the fuel comes from a well or from used cooking oil. What changes is upstream: cultivation or collection of the feedstock, transport, conversion, distribution, and especially the biogenic or captured carbon that is deemed to offset future combustion.

Workers in high-visibility vests operate a truck dispensing liquid into a large container at dusk.
Sustainable fuel is carefully loaded for aviation use.
Where the emissions difference between fossil jet fuel and certified blend liesTwo stacked columns compare the balance per unit of energy. The lower part, identical in both cases, represents combustion in the engine. The upper part represents the upstream stages: cultivation or collection, transport, conversion, distribution. It is much shorter for the certified blend, and a vertical arrow between the two tops measures the claimed difference. The claimed difference therefore lies entirely upstream, never at the exhaust.emissions per unit of energysocleidentiqueamontcombustionclaimed differencefossil jet fuelcertified blend
Nothing changes at the exhaust. The engine emits the same quantity of carbon dioxide per unit of energy released. The entire reduction happens upstream of the tank, which is why it is proven by accounting entries rather than by a measurement on board.

The value assigned to a batch comes from two approaches. The first applies a default value published for the pathway, deliberately conservative, to which may be added an indirect land-use change term for cultivated feedstocks. The second calculates a real value, specific to the facility and its supply, which must then be verified. The first is simple and costs a few reduction points; the second is demanding and holds up better to an auditor.

  • The first approach uses standard values for each fuel pathway (like HEFA or ATJ) that are set by regulators
  • The second approach calculates actual emissions based on real production data, which requires more documentation
  • Both methods must be approved by certification schemes to be valid

Three regimes can host the same reduction, and that’s where the key lies. The international carbon offsetting scheme deducts it from the operator’s offsetting obligation, subject to a minimum reduction threshold relative to a reference value of fossil kerosene expressed per unit of energy, and land criteria excluding lands with high carbon stocks converted after a reference date. The European emissions trading system assigns a zero emission factor to the eligible portion, with an allocation mechanism to absorb part of the price gap. A freight customer, finally, may want the same ton for its own inventory. These three uses are mutually exclusive.

Uniqueness test before attributing a certified batch to a flightDecision sequence. A certified batch goes through a test: is the quantity already counted elsewhere, in a national obligation or in a third party’s balance? If so, the claim is prohibited. If not, the quantity can be attributed to the operator’s flights, then entered in the annual report submitted for verification.certified batchalready countedelsewhere?ouirevendication interditenonattributed to the flightverified annual reportone quantity, one declaration
Uniqueness is tested before attribution, not after. The question is not whether the fuel was produced, but whether its attribute has already been used elsewhere: volume required by a mandate, a shipping customer’s balance, marketing claims.

The checkpoints, in order.

The chain is checked at six points, and each has its own failure mode. An operator who only monitors the last one will never see a defect that arose three links earlier, even though it’s the operator who will present the declaration to the authority.

Control points in the chain and the typical failure at each
Étape What is checked Expected document What causes failure
Feedstock Nature, origin, eligibility of the feedstock, no land conversion Collector’s declaration, site audit report Feedstock reclassified as waste or residue without upstream traceability
Conversion Approved pathway, yields, life-cycle value applied Scheme certificate, actual value calculation or default value Batches with different values merged without accounting segregation
Blending and release Compliance with the specification, pathway limit, redesignation Certificate of analysis and batch release note Limit exceeded, incomplete tests, batch released prematurely
Cession Full transfer of attributes at each change of ownership Transfer declaration Attribute lost, diluted or duplicated at an unaudited intermediary
Delivery to the operator Quantity, airport, reporting period, target scheme Supplier’s named declaration Volume already counted towards a national obligation of the supplier
Annual declaration Consistency with fuel consumed, uniqueness of the claim Verified emissions report, approved monitoring plan Double claiming between the mandatory scheme and marketing claims

The consistency mentioned in the last line deserves a word. The fuel consumed is not a declared data point: it is reconstructed according to the method in the monitoring plan, either from the fuel uplifted or from the change in tank quantities between flights. The quantity claimed as certified cannot obviously exceed what the operator actually burned over the period and the scope of flights concerned.

The right reflex. Reject any supplier declaration that does not include four mentions: the certification scheme and the batch identifier, the accounting period, the life-cycle value applied with its method, and an exclusivity clause stating that no other claim is made on the same quantity. Then archive the document with the emissions file for the year, never in the purchase file: the verifier will ask for it, not the buyer.

What the system changes in operations.

The first effect is a flight preparation effect, and it doesn’t come from the fuel itself. The European regulation aimed at leveling the playing field requires suppliers to provide an increasing share of sustainable fuel, and operators to refuel on-site nearly all the fuel needed for their departures from a Union airport—about nine-tenths of the annual requirement. The target is the carriage of fuel for tariff savings: the margin remains possible for operational or safety reasons, but it must be justifiable, which changes the nature of a decision that was previously purely commercial.

The second effect is physical, but not the one that is counted. Synthetic components are more paraffinic than conventional kerosene: fewer aromatics, less sulfur, and therefore significantly fewer soot particles in the engine. These particles serve as nuclei for the ice that forms contrails. A rich blend produces optically thinner and shorter-lived contrails. This effect, unrelated to carbon dioxide, is not included in any compliance accounting today, even though its magnitude is considered comparable to the life-cycle balance that is declared.

Effect of the certified share on particles and on carbon dioxideTwo plots against the share of certified fuel in the blend. A falling solid curve represents the number of soot particles emitted, which decreases as aromatic and sulphur content falls. A horizontal dashed line represents carbon dioxide at the engine exit, which does not change. A vertical line marks the blending limit allowed by the pathway.effect at the exhaustparticles and sootcarbon dioxideblending limitcertified share in the blend
The only physically measurable effect on board is not the one being counted. Fewer aromatics and less sulphur, hence fewer ice nuclei: contrail behaviour changes, while carbon dioxide at the engine does not move.

The third effect is the most discreet: the mass density and mass energy of the blend shift slightly within the specification envelope, paraffinic components being a bit less dense and a bit more energetic by mass. The envelope being respected, flight preparation does not change. However, an airline that closely tracks its specific fuel consumption should know which departures were served with a rich blend, or it will attribute to its fleet a drift that comes from the product.

What to check at home.

Three documents deserve to be opened before the next audit campaign. The purchase contract first: does it include the reference period, the targeted regime, and the exclusivity clause, or does it only specify a volume and a price? The fuel policy in the operations manual next: does it explicitly designate who holds the evidence, where it is archived, and for how long, in line with the verification cycle? The monitoring plan finally: is the method for determining the fuel consumed the one actually applied, including on flights operated under aircraft lease with crew, where the responsibility for the declaration should be written in black and white?

There remain assumed gray areas. The acceptance of an attribute decoupled from the product varies from one regime to another, and the acceptable distance between the delivery location and the claim location is not uniformly defined. The interaction between a volume imposed by a national mandate and a voluntary claim on the same volume remains a recurring source of dispute. Finally, the sub-obligation targeting synthetic fuels of non-biological origin creates a second account, with its own evidence, within the first.

For those preparing a qualification or aiming for a fuel performance monitoring role, the subject is no longer peripheral: it comes up in interviews in a simple form, knowing how to explain why no physical test will ever qualify a flight as sustainable. Field discussions on these topics continue on the FL330 forum, and operational monitoring-related paths are listed on formations.fl330.com.

In case of discrepancy between the above and the applicable texts, the fuel specifications in force, the rules of the relevant compliance regime, and the operator’s approved documentation prevail without discussion over this article.

Commentaires

Leave a Reply

Découvrez l’écosystème FL330

FL330, c’est toute l’aviation professionnelle — explorez nos autres espaces.