Full-thrust climb gradient (GA)

The full-thrust climb gradient (GA) is the minimum slope an aircraft must maintain during ascent with maximum engine thrust to meet regulatory safety standards. It accounts for factors like weight, altitude, and environmental conditions, ensuring the plane can clear obstacles or reach a safe altitude if an engine fails.

This gradient is calculated based on performance charts and depends on the aircraft’s design, thrust-to-weight ratio, and aerodynamic efficiency. Pilots use it to verify that the climb is safe, especially during takeoff, when terrain or air traffic may require a steep ascent.

For example, a commercial jet like the Airbus A320 may have a GA of around 2.4% at sea level under standard conditions. This means for every 100 feet of horizontal distance, the plane must climb at least 2.4 feet to meet the required gradient. If the actual climb rate is lower, the takeoff may be aborted or the procedure adjusted.

In practice, pilots monitor the climb performance closely, ensuring the aircraft stays above the GA to avoid terrain or obstacle clearance issues. Deviations from this gradient could indicate a performance problem or require immediate corrective action.

The captain confirmed the full-thrust climb gradient (GA) was being maintained before reducing thrust to the climb setting.

Découvrez l’écosystème FL330

FL330, c’est toute l’aviation professionnelle — explorez nos autres espaces.