Maximum Thrust Climb Gradient (GA)

The Maximum Thrust Climb Gradient (GA) is the steepest angle of climb an aircraft can sustain when its engines are operating at maximum continuous power. This metric is critical for takeoff performance, especially from short or obstructed runways, as it determines the minimum climb gradient required to clear obstacles safely.

GA is influenced by factors like aircraft weight, altitude, temperature, and wing configuration (e.g., flaps or slats). Pilots and flight planners use it to ensure compliance with regulatory climb gradients, which are often set higher than GA to account for engine failure scenarios or other operational constraints.

For example, a regional turboprop like the ATR 72-600 has a GA of approximately 10.5% at maximum takeoff weight (MTOW) under standard conditions. This means it can climb at a 10.5-meter vertical gain for every 100 meters of horizontal distance when engines are at full power. If an airport’s obstacle clearance requires a 12% gradient, the aircraft would need to reduce weight or adjust its takeoff configuration to meet the requirement.

In practice, GA affects flight planning, dispatch decisions, and pilot technique. A lower-than-expected GA due to high density altitude or engine degradation could necessitate a longer takeoff roll or a go-around if obstacles cannot be cleared safely.

The flight manual specifies that the Maximum Thrust Climb Gradient (GA) must be verified during performance checks to ensure compliance with certification standards.

Découvrez l’écosystème FL330

FL330, c’est toute l’aviation professionnelle — explorez nos autres espaces.