radar vectoring

/ˈreɪdɑː ˈvektərɪŋ/ noun phrase

Radar vectoring is a method used by air traffic controllers to direct an aircraft by issuing specific headings (directions) based on real-time radar surveillance. This ensures safe separation between aircraft, especially in congested airspace or during approaches to airports.

The controller monitors the aircraft’s position on the radar display and calculates the required heading to achieve the desired path, such as intercepting a specific route or avoiding traffic. The pilot follows these instructions until reaching a predetermined point, such as an initial approach fix or a holding pattern.

For a pilot, radar vectoring changes their navigation workflow by replacing reliance on ground-based navigation aids (like VORs or NDBs) with direct, dynamic guidance from ATC. For example, a controller might instruct an aircraft to turn to ‘heading 270’ to align with the localizer for an ILS approach, adjusting the heading as needed to ensure proper spacing from other traffic.

The controller vectored the Boeing 737 to heading 180 to align it with the extended centerline of the runway.

See also: separation minima · standard terminal arrival route · holding pattern

Découvrez l’écosystème FL330

FL330, c’est toute l’aviation professionnelle — explorez nos autres espaces.