-

Seats and cabin interiors in retrofit: what dynamic performance demands of the installation
The seat is approved, its dynamic test report is complete, the quotation is signed — and the retrofit project stalls at the…
-

Failure probability targets: where the required orders of magnitude come from
A safety case concludes at 2.7 × 10⁻¹⁰ per flight hour for the total loss of a function, and all that remains…
-

Certified noise level: why it does not match what a resident measures
A resident sets their phone on the table at the community liaison meeting and reads out loud the figure recorded during the…
-

Wet Leasing in the Middle of Restructuring: Where Operational Control Actually Sits
An aircraft with no livery, a flight number sold by one airline, a captain trained and checked by another: at two in…
-

Alternative Means of Compliance in Certification: Demonstrating an Equivalent Level of Safety
A design organisation proposes to justify a strength requirement by another route: the published means assumes a test that the part’s architecture…
-

Human factors in certification: how a cockpit alerting philosophy is judged
Certification simulator evaluation session: engine failure shortly after rotation, initial climb on one engine, reconfiguration. The crew calls out the alarm, silences…
-

From Flight Test to Manual: How a Measured Distance Becomes a Guaranteed Figure
The landing calculation clears, but only just, and someone eventually asks the one question that matters: this number out of the manual…
-

Two Modifications Approved Separately: The Interaction Nobody Assessed
The aircraft comes out of the shop with one more antenna on its back. The two installations it now carries are each…

