Certifying authorisation: why the licence is not enough to sign

A mechanic examines a binder of certifying authorisation documents in a hangar with an aircraft under maintenance.

A mechanic arrives with a valid B1.1 licence, the type rating entered on the back, and fifteen years on the ramp behind him. On Monday morning, he signs nothing. Not because anyone doubts his competence, but because the document that opens a signature is not issued by the authority: it is issued by the maintenance organisation, it lists a written scope line by line, and it can be withdrawn within the hour without the authority ever being notified. This intermediate layer appears on no résumé, and yet it governs everything that happens in a hangar.

Two documents, two issuers, two logics

The maintenance licence attests to a foundation: knowledge validated by examination, practical experience on record, and, for each aircraft, a type rating obtained after theoretical and practical training. It is issued by the competent authority, it belongs to the person, it travels with them, and it renews on a multi-year cycle. It says nothing about where one works.

The certifying authorisation is of an entirely different nature. It is not a title, it is an act of the employer. An approved maintenance organisation puts its approval on the line with every certificate of release to service issued under its cover: if a signature turns out to be undue, it is the organisation that answers to the authority, not only the signatory. It draws a logical and non-negotiable consequence from this: it chooses for itself who signs, on what, and how far. The authorisation exists only within the scope of its approval, and it ends with the employment relationship.

From licence to signature: four steps, two issuersFour blocks in a row. The first, under the competent authority, is the licence, renewed on a multi-year cycle. The next three belong to the approved organisation: documented competence assessment, a written and revocable authorisation, then the signature of the certificate of release to service.competent authorityapproved maintenance organisationLicenceratings enteredmulti-year cycleAssessmentcompetencedocumentedAuthorisationwritten scoperevocableCRSsignaturebinds the approval
The licence opens the door, the authorisation walks through it. The first block belongs to the person. The next three belong to the organisation, which grants them and can take them back without answering to anyone.

The licence proves you know how to do the work, but the authorisation proves you can sign for it at your current job. The company decides who can sign based on their own rules, not just the licence.

A B1.1 mechanic with an A320 rating on their licence joins a new airline. The licence is valid, but the new company requires 3 months of supervised work on their specific A320 fleet before granting authorisation to sign certificates. The mechanic must wait 2 months before getting full signing rights.

This duality explains a good part of the misunderstandings that arise in hiring: the candidate presents a licence, the organisation assesses a fitness to sign under its own procedures. The two never quite overlap, and the gap is paid for in weeks.

What each of the two documents covers
Criterion Maintenance licence Certifying authorisation
Issuer Competent authority Approved maintenance organisation
What it attests Knowledge, experience, ratings Fitness to bind a given organisation’s approval
Scope Categories and ratings entered Types, location, nature of work, named limitations
Duration Multi-year renewal cycle No fixed term, as long as conditions hold
Who checks Authority, on file Organisation’s compliance monitoring function, continuously
Withdrawal Administrative procedure of the authority Internal decision, immediate, no external formality
Portability Follows the person Stays with the organisation

Scope: what is written, not what one knows how to do

A useful authorisation is a precise authorisation. The document names the open categories, the aircraft types and, where needed, the variants and powerplants. It distinguishes line maintenance from base maintenance, because the two involve neither the same work nor the same depth of disassembly. It carries over the limitations inherited from the licence, those arising from examinations not taken or from partial experience. Finally, it isolates the tasks that require additional qualification: work on electrical wiring interconnection systems, elements critical to fuel tank safety, special processes belonging to a workshop rather than a ramp crew.

The scope matrix: what each category opens, in line and in baseA table with three rows and two columns. Line maintenance column, base maintenance column. Category A opens the approval of simple scheduled tasks in line and nothing in base. Categories B1 and B2 open the approval of troubleshooting in line and a support staff role in base. Category C opens nothing in line and the approval of the full check in base.line maintenancebase maintenanceCategory ACRS simple tasksout of scopeCategories B1 B2CRS troubleshootingsupport staffCategory Cout of scopeCRS of the checkthe cell applies only to the types and variants named on the document
A category does not say what one knows how to do, it says where the signature is valid. The same aircraft changes cell depending on whether it is on the ramp or in the hangar, and the cell only opens for the types listed by name.

The reading rule fits in one sentence: the scope says what is written. If a task is not listed there, it is not covered, even when competence is obvious and the gesture has been performed a hundred times elsewhere. This is where most of the discrepancies found in audits sit, and they are almost never discrepancies of skill.

The variant trap. Two aircraft carry the same commercial name, an avionics standard or a powerplant separates them, and the authorisation covers only one. The mechanic sees a type he knows; the scope sees a variant absent from the list. Checking takes a few seconds on the document and is almost never done at night, on a layover, under departure pressure.

The competence assessment, the step no one sees

Before issuing, the organisation must establish and document that the person knows how to work at its facility. The file is not limited to a photocopy of the licence. It checks recent practical experience on the type in question, knowledge of the organisation’s own procedures as described in its manual, mastery of the applicable regulation in its version currently in force, human factors training, and the ability to read and understand the maintenance documentation in its original language. This last point is not cosmetic: a misread task card produces a valid signature on flawed work.

Three men in a workshop review technical drawings under a lamp.
Technical review ensures compliance beyond licensing requirements.

The assessment itself generally combines three things: a technical interview conducted by a designated person, a review of work performed under supervision and recorded, and an observation on the job. It concludes with a named record that the organisation keeps for the long term, including after the person’s departure, because the authority can trace the chain of responsibility for an approval long after it was issued.

The twenty-four-month rolling window: two records, two outcomesA timeline covers the last twenty-four months. Above it, two bands. Case A accumulates two work periods totalling seven months of maintenance and meets the recency requirement. Case B accumulates two short periods totalling four months and does not meet it, even though its licence is perfectly valid.case A — 7 months combined, recency metcase B — 4 months combined, privileges suspended24 months agotodayregulatory threshold: on the order of six months within the window
It is not seniority that counts, it is what the window still contains. Case B has the same licence and the same type as case A. A ground posting, a long break or a slow season are enough to empty the window, and the organisation notices before the person does.

Recent experience is not merely an entry condition: it is a condition of exercise. The mechanism set out in the European regulation rests on a rolling two-year window, within which a minimum volume of actual maintenance — on the order of a few months — must have been carried out; the exact figure, its equivalences and the counting method are to be read in the version of the text currently in force, never in a transcribed internal memo. The consequence is counter-intuitive: the longer the seniority, the greater the risk of oversight, because no one watches a counter that has never caused a problem.

The right habit. Keep your own dated record of experience, by type and by nature of work, without waiting for the employer to do it. The day you need to prove recency, before a new organisation or after a long break, it is you who produces the evidence, and an information system left behind six months earlier will give you nothing back. The qualification pathways gain several weeks, incidentally, when this record already exists.

The three clocks that keep the authorisation alive

An authorisation once issued is not an authorisation secured for good. Three counters run in parallel and each one, alone, can put it to sleep. The first is the validity of the licence, which renews with the authority on a long cycle. The second is continuation training, which the organisation must provide at regular intervals and which is nothing like a courtesy reminder: it covers regulatory developments, changes to internal procedures, lessons learned from events that occurred within the organisation, and the upkeep of human factors knowledge. The third is the recency described above.

The three clocks of the authorisation, and which deadline bites firstThree bands stacked over a six-year axis. The licence renews on a multi-year cycle, continuation training on a markedly shorter cycle, recent experience is checked continuously. A vertical mark placed early on the axis shows that the first deadline reached is never that of the licence.licence — multi-year cyclecontinuation training — short cyclerecent experience — continuous0246first deadlineyears (indicative scale)
Three counters run in parallel, and it is the shortest one that governs. The licence gives a false sense of security: it easily outlasts continuation training and recency, which are the two real causes of administrative suspension.

Your authorisation can be suspended if you miss training or don’t have enough recent experience, even if your licence is still valid. The company checks these things, not the government.

A B1.3 mechanic with a valid licence and 10 years of experience on Boeing 737s takes a 6-month parental leave. When they return, the organisation finds only 3 months of recent experience in the 24-month window. The mechanic must complete 3 months of supervised work before regaining full signing rights.

The deadline that bites is never the one being watched. The licence, with its long cycle, gives a misleading sense of security. In practice, administrative suspensions almost always fall due to continuation training not scheduled in time, or to a recency window emptied by a ground assignment, sick leave, parental leave or a secondment to a technical office. Returning to the job then requires refresher work and, often, supervised work before the full scope is restored.

Limiting, suspending, withdrawing: the organisation’s safety valve

The organisation must be able to withdraw an authorisation immediately, without notice and without external procedure. This power is the counterpart of its responsibility. The triggers are well known: a maintenance error brought to light, a discrepancy found by compliance monitoring, an event reported by a crew or by the workshop, doubt about physical fitness or fatigue, deliberate disregard of a procedure, or simply a deadline missed.

What happens between a discrepancy found and the fate of the authorisationA discrepancy found leads to the immediate suspension of the authorisation, then an analysis that separates individual failure from system failure. Three outcomes: reinstated after training, limited in scope, or withdrawn, with the licence remaining intact.DiscrepancyfoundSuspensionimmediateAnalysisact or systemReinstatedafter trainingLimitedscope reducedWithdrawnlicence intact
Suspension is not a sanction, it is a precaution. It falls before anyone knows whether the cause is a gesture or a procedure: the organisation cannot let a signature it doubts keep running.

Suspension comes before the analysis, and this is a distinction many practitioners find hard to accept. It prejudges nothing. The analysis that follows must separate what stems from an individual action from what stems from an ambiguous task card, unsuitable tooling, schedule pressure or insufficient staffing. An organisation that systematically concludes individual fault deprives itself of the information that would have prevented a repeat occurrence, and the authority reads that very clearly in the files.

The silent suspension trap. An authorisation can lapse without anyone announcing it, through a simple missed continuation-training deadline. The mechanic works normally, takes a night flight, signs an approval, and the discrepancy only appears at the next documentary check. The consequence is not only disciplinary: it bears on the validity of the approval issued, and therefore on the airworthiness of the aircraft concerned.

Changing employer: what follows, what stays behind

A change of organisation lays the mechanism bare. What follows the person is the licence, the type-training certificates, the human factors training certificates and the experience record. What stays behind is the authorisation, which ends on the last day of the contract. The new organisation cannot take it over: it must redo its own assessment, under its own procedures, and issue its own document. The delay ranges from a few days to several weeks depending on familiarity with the exact standard of the aircraft operated and the need for supervised work.

What carries over from one organisation to another, and what has to be rebuilt
Element Follows the person To be redone at the new organisation
Licence and type ratings Yes Nothing, unless renewal is due
Human factors training Yes, on certificate Refresher under the internal cycle
Experience record and supervised work Yes, if documented Recency check
Knowledge of procedures No Training on the organisation’s manual
Competence assessment No In full, with a named record
Certifying authorisation No New issuance, scope renegotiated

The case of agency staff deserves particular attention. Whatever the contractual arrangement, the organisation under whose approval the certificate is issued remains responsible for it. It therefore authorises staff itself, by name, including a temp worker or an employee seconded by a contractor. A service contract never delegates the authorisation, and exchanges between practitioners show that confusion on this point remains common in organisations that rely heavily on subcontracted labour.

Support staff in categories B1 and B2 on a base visit follow the same mechanism without ever signing the final approval. Their designation is named, their scope is written, and the absence of their signature in no way reduces the competence requirement: it is they who confirm to the category C holder that the work was carried out in accordance with approved data.

What to go and check in your own file

Three checks take half an hour and spare months of trouble. The first: request the written copy of your scope and read it line by line, matching each type and each variant against what you actually approve during the week. It is not unusual for an aircraft recently added to the fleet to have never been added to the document. The second: identify who schedules continuation training and on what date yours falls due, since this information travels poorly once headcount grows. The third: find out in what form the organisation records your experience and whether you can obtain an extract of it.

Grey areas remain that the text does not settle completely, and they are handled at the level of the organisation’s manual. Line troubleshooting of a minor structural defect, resuming work started by another crew at another stopover, the boundary between the simple task open to category A and the troubleshooting reserved for category B, the interface with specialist workshops when a component leaves and comes back: all subjects where the only valid answer is the one written in the procedures actually applied.

For anyone preparing a qualification, the consequence is clear and it shifts the centre of gravity of the effort. The type examination opens the door; it is the supervised work on the aircraft and the internal assessment that walk through it. Planning that supervised work, having it properly recorded, and checking with whom the assessment will be conducted weigh more, on the real calendar to access the signature, than the date on which one sits the theoretical test.

In case of divergence, the applicable regulation, the decisions of the competent authority and the maintenance organisation’s exposition prevail over this article, whose sole purpose is to shed light on a mechanism.

Questions fréquentes

Can an authorisation cover an aircraft type absent from the licence?

No, the organisation can only restrict what the licence opens, never extend it. If the type or category does not appear on the licence, no internal document creates the corresponding privilege, and a signature issued under those conditions is undue. The only path is the entry of the type rating on the licence by the authority, after the required training and practical experience. The limited authorisations that the regulation provides for certain restricted tasks follow their own conditions and must not be confused with a type rating.

Does the authorisation follow the mechanic who changes employer?

No, it ends with the employment relationship. What follows the person is the licence, the type ratings, the training certificates and the experience record. The new organisation must conduct its own assessment, under its own procedures, and issue its own authorisation with its own scope.

What happens when continuation training reaches its deadline without being scheduled?

The authorisation becomes inoperative, generally through administrative suspension, even if no one warns the person at the time. Approvals signed after the deadline raise a validity issue that goes beyond the disciplinary sphere, since it touches the airworthiness of the aircraft. That is why the deadline must be known to the holder personally, not only to the training department.

Does withdrawal of an authorisation mean loss of the licence?

No, these are two separate acts. The organisation withdraws the authorisation it issued; only the competent authority can act on the licence, through a separate administrative procedure. However, the reason for the withdrawal is recorded in the organisation’s records, and a future employer may become aware of it during the assessment.

How is the recent experience required to exercise privileges proven?

By a dated record of the maintenance work actually carried out, by type and by nature of task, assessed over a rolling two-year window for which the applicable text sets the minimum volume. The employer keeps a record of it, but it becomes hard to retrieve after departure. Keeping your own record, in parallel, remains the only reliable way to prove recency before a new organisation.

Does support staff on a base visit need an authorisation?

Yes, their designation is named and their scope is written, exactly as for a holder of a certifying authorisation. They do not sign the final approval, which falls to the category C holder, but they attest that the work was carried out in accordance with approved data. The competence and recency requirement therefore applies in full.

Commentaires

Leave a Reply

Découvrez l’écosystème FL330

FL330, c’est toute l’aviation professionnelle — explorez nos autres espaces.