under reserve

An ‘under reserve’ part is one that continues to be used in service, but only until the next scheduled inspection confirms it is still airworthy. This status is typically assigned when a part shows minor wear or damage that doesn’t immediately ground the aircraft but requires closer monitoring.

The term reflects a cautious approach, allowing operations to continue while ensuring safety. Inspections are conducted at set intervals (e.g., every 100 flight hours), and the part is either cleared for further use or replaced if it fails further checks.

For example, if a hydraulic fitting shows slight corrosion but passes a pressure test, it might be marked ‘under reserve’ and rechecked at the next 50-hour inspection. If it fails, the aircraft is grounded until the part is replaced.

This system balances operational efficiency with safety, preventing unnecessary downtime while avoiding risks from degraded components.

The mechanic noted the actuator was 'under reserve' after the last inspection, so we'll monitor it closely until the next check.

In other languages

Découvrez l’écosystème FL330

FL330, c’est toute l’aviation professionnelle — explorez nos autres espaces.