An operator offers you a day rate for three months on a type you already hold, and the figure looks comfortable against your payslip. Yet it says nothing about what matters: how many days you will actually invoice over the year, and everything the employer used to settle without the line ever showing. A day rate is not something you pick, it is derived from a full annual cost divided by a number of days that almost no one estimates correctly the first time.
The only figure that matters is not the daily one
The question asked in a simulator corridor is always the same: “how much do you sell yourself for?” It is the wrong question. The day rate is not an input, it is a quotient. In the numerator, everything the year must pay for: disposable income, social and tax contributions, currency/skill maintenance, insurance, structure, a provision for the unexpected. In the denominator, the days actually invoiced — not the days worked, still less the days available.
Comparing a day rate to a monthly salary divided by twenty-one is like comparing a selling price to a cost price: the two numbers are not on the same plane. Sound reasoning starts from cost and works back to price. It yields two results, not one: a reference rate, the one you announce, and a floor rate, the one below which you do not sign.
The real count of billable days
This is the item everyone overestimates. Out of three hundred and sixty-five days, subtract in order weekly rest and days off, leave and public holidays, time spent on currency maintenance and the medical exam, admin and prospecting, then the gaps between contracts — those few weeks that separate the end of one assignment from the start of the next boarding, and that no operator pays for.

The result depends above all on the type of operation, and that is the first thing to correct when you take over a colleague’s calculation. A long seasonal reinforcement lines up certain days, but imposes the operator’s full rest cycle. A short business-aviation replacement bills denser days and pays better, at the cost of a wait between two calls that nobody remunerates. Instruction and simulator work fill the calendar well, but consume their own recurrent training and their own standardisation, on top of the pilot’s.
| Item removed from the 365 days | Long seasonal reinforcement | Short replacements, business aviation | Instruction and simulator |
|---|---|---|---|
| Weekly rest and days off | 115 | 105 | 120 |
| Leave and public holidays | 30 | 25 | 30 |
| Currency maintenance, medical, admin | 25 | 30 | 35 |
| Gaps between contracts, waiting and prospecting | 30 | 55 | 20 |
| Contingencies: sickness, cancelled assignment, grounding | 15 | 20 | 10 |
| Billed days | 150 | 130 | 150 |
Three columns, three business models. At equal net income, the middle column requires the highest rate, even though it is the one where the client negotiates hardest, for lack of visibility on its own workload plan. Mixing two modes smooths the denominator, but only if the calendars do not overlap: two assignments overlapping by a week end in a refusal, not one extra day. And the right-hand column shows the least intuitive effect — a very busy activity can remain the least profitable if its currency maintenance is doubled.
The twenty-days-a-month trap. Availability is not the same as billing. Flight and duty time limitations impose rest that nobody remunerates, a three-month assignment never dovetails perfectly with the next one, and an operator who cancels its season owes nothing without a cancellation clause written into the contract. Building a rate on two hundred and twenty days when you actually bill a hundred and fifty means announcing a price a third lower than what the activity needs — and finding out once it is too late to renegotiate.
Your day rate must cover all your costs, not just your salary. Many days each year are lost to rest, training, and gaps between jobs. If you don’t account for these, you’ll end up earning less than you need.
A pilot working 150 days/year on an A320 needs a day rate of €1,200 to match a €180,000 gross salary. If they only bill 130 days due to gaps, the rate must jump to €1,385 to maintain the same income. Missing just 20 days increases the required rate by 15%.
What the employer was paying without the payslip ever showing it
The gross salary is not the cost of the position. Between what the operator spends and what you receive sit employer contributions, provident insurance, loss-of-licence cover when it is collective, aviation-specific pension where it exists, paid leave, layover compensation, hotel, positioning, the medical exam and the entire recurrent training. Going independent means taking these lines onto your own balance sheet.
An honest comparison therefore does not pit yesterday’s net pay against tomorrow’s invoice, but two full costs: what the position cost the operator, and what your activity must cover.
Currency maintenance is no longer someone else’s budget line
This is where the calculation goes wrong most often, because the item is twofold: it costs money and it consumes billable days. A recurrent course means days on the ground, simulator sessions, travel, hotel nights, and just as many days during which you bill no one. Line checks and proficiency checks follow their own clock, independent of your workload plan. The medical exam has its own periodicity, which tightens with age. Recent experience, meanwhile, is not negotiable: without a minimum number of take-offs and landings performed in the preceding few months, carrying passengers is closed off, and you have to buy back circuits or a simulator session to reopen the right — at the rental operator’s rate, a day billed to no one.
The reasoning holds beyond the flight deck: certifying staff must demonstrate recent maintenance experience over a rolling period and keep their type training current; a cabin crew member keeps their certificate, security, dangerous goods and first-aid training current. In every case, an untended competency does not degrade slowly: it becomes void the day the deadline passes.
Insurance, structure, and the risk no one carries for you any more
An employee benefits from a safety net they are unaware of until they fall into it. The independent buys it, or goes without. Three lines are non-negotiable. Professional liability insurance, which you must check actually covers the activity you carry out. Loss-of-licence cover, a risk specific to the profession, the one that turns a medical unfitness into the end of your income: taken out individually, it costs considerably more than a collective policy negotiated by an airline. Finally, provident insurance, whose waiting period should be read before signing.
Then come the structure and its upkeep: legal form, chartered accountant, minimum contributions that remain due with no revenue under several statuses, value-added-tax treatment depending on where the parties are established and the nature of the service, and cash flow. This last point kills more businesses than the rate does: several weeks commonly pass between the end of an assignment, the issuing of the invoice and its payment, often more when validation goes through a department that only closes at the end of the quarter. A starting activity must fund several months of expenses before collecting its first euro.
The cover you think you have. Many contractors assume they are covered by the operator’s insurance because they work under its certificate. Ask for the certificate in writing and read the definition of the insured party: an independent contractor is sometimes excluded from it, or covered only during the assignment itself, not during positioning. On the day something happens, it is that wording that decides, not custom.
Working back from the full cost to the day price
The construction is arithmetic. Add up the targeted net income, the related social and tax contributions, the annual cost of currency maintenance, insurance, structure and a risk provision. Divide by the number of billed days established above. The result is not your price: it is your daily break-even cost. The price then adds the margin, which pays for the unexpected and your scarcity.
Sensitivity to the denominator is severe, and that is what monthly reasoning hides. Going from a hundred and fifty to a hundred and twenty billed days — a long gap between contracts, a stoppage, a shifted season — raises the break-even cost by a quarter, without any expense having increased. A fair rate is therefore built on a low-case assumption, not on the best imaginable year; the gap between the two assumptions is precisely the safety margin that negotiation will try to claw back from you.
The right reflex: build from the bottom, announce from the top. Write down the floor annual cost before any discussion, using the low-case assumption for days. You come out of it with two numbers: a reference rate, the one you announce, and a floor rate, below which you do not sign — including implicitly, because a rate accepted once becomes your market price with that operator.
Comparing honestly with a salaried position
The table below does not say which arrangement is better: it says who pays for what. Fill it in with your own figures, taken from your latest payslip and insurance quotes. Many comparisons fall short for lack of pitting two quantities of the same nature against each other.
| Item | Employee | Independent |
|---|---|---|
| Social contributions | Shared, deducted at source | Your own responsibility, with a cash-flow lag specific to the status |
| Leave and public holidays | Paid | Unbilled |
| Sick leave | Compensated according to the regime and agreement | Depending on the provident cover taken out, after a waiting period |
| Loss of licence | Often a collective policy | Individual policy, more expensive |
| Recurrent training and simulator | Paid, during working time | Paid by you, on unbilled days |
| Medical exam, licence renewal | Generally covered | Your own responsibility |
| Type rating | Financed, with a service commitment | Your own investment or rebilled |
| Positioning, hotel, meals | Covered or compensated | To be negotiated in the contract |
| Pension | Continuous contribution, aviation-specific regime where applicable | Depending on status, often needs topping up |
| Periods without activity | Paid | Zero income, fixed costs continue |
| Liability insurance | Carried by the operator | To be taken out, and checked |
What remains does not fit into any column. On the employee side: seniority, progression towards the left-hand seat, schedule stability, financed type training, the value of notice. On the independent side: choice of assignments, exposure to several operators which protects against a redundancy plan, an income that depends on no seniority list. These are not sentimental details but options, whose value changes depending on where you stand.
The grey area, and what to check about your own situation
Two topics escape the spreadsheet and must be read before signing. The first is the real nature of the relationship: a contractor who works exclusively for one client, on its schedule, with its resources and under its subordination, exposes themself, along with the client, to reclassification, whatever label the contract carries. The second is social affiliation, which follows the home base and the place of work far more than the client’s registered office: an assignment operated from another state must be anticipated before the first flight, not at the first tax return.
Before discussing a figure, gather four documents: your latest complete payslip with the employer cost, real quotes for liability insurance, provident cover and loss-of-licence cover, the annual budget for your currency maintenance as an operator would bill it, and your calendar for the past twelve months to count your days honestly. These documents produce the rate; intuition does not. Further benchmarks are available on the FL330 freelance portal.
One last thing that is far from obvious: this rate is not a given. It must be revised every year, because the cost of currency maintenance rises and premiums track your age. A rate kept unchanged for three years running is a pay cut.
Applicable regulations, the operator’s approved documentation and the advice of a qualified tax or social-security counsel in your country of affiliation take precedence over this article, which describes a calculation mechanism, not an individual situation.
Questions fréquentes
How many days can one reasonably bill in a year?
A prudent assumption for a full-time contractor runs around a hundred and fifty days, sometimes fewer, once weekly rest, leave, currency maintenance, admin and gaps between contracts are removed. The figure depends above all on the length of assignments and the regularity of the order book. Count your actual last twelve months rather than using an industry average, and build the rate on the low-case assumption.
How do you convert a gross salary into an equivalent day rate?
You do not convert it, you rebuild it. Start from the full cost of the position for the employer, add what the operator was paying outside the salary — recurrent training, medical, provident cover, loss of licence, positioning — then the costs specific to your own structure and a risk provision. Divide this total by your number of billed days, then add a margin: the quotient obtained is only a break-even point.
Should currency maintenance be included in the rate calculation?
Yes, and twice over. It weighs in euros — ground training, simulator, checks, medical exam, travel — and it weighs in days, since a recurrent course is a week you bill to no one. Ignoring the second effect is the most common mistake: the budget then looks right, but the denominator of the calculation is wrong.
Should you grant a discount on a long assignment?
A discount is only justified if the assignment truly fills the denominator, that is, if the days are firm and paid even in the event of partial cancellation. A long assignment that can be terminated on short notice does not offer this certainty and does not deserve a rate concession. A short, late and uncertain assignment, on the contrary, costs waiting days and must be billed higher.
Which insurance policies are essential as an independent?
Professional liability insurance matching the activity actually carried out, loss-of-licence cover suited to the profession’s medical risk, and provident insurance covering work stoppage with an acceptable waiting period. Also ask the operator for the certificate of its own policy and check the definition of the insured party: independent contractors are sometimes excluded from it.
When should you revise your rate?
At least once a year, on a fixed date, by redoing the calculation with the days actually billed over the past year and new insurance quotes. Premiums track age and the cost of the simulator rises: a rate kept unchanged for three years running amounts to a real pay cut. A revision announced in advance goes down better than an improvised increase mid-negotiation.

Leave a Reply
You must be logged in to post a comment.