-

An occurrence report placed in a disciplinary file: the protections and their blind spots
A few weeks after a flap speed exceedance reported the same evening, the notice of a disciplinary hearing arrives. In the file…
-

Qualifying a new material source: the test sequence that takes two years
A second prepreg source, quoted at the same areal weight and with the same resin, a far shorter lead time, and a…
-

Invoicing an assignment outside France: where the service is located and why it matters
Three weeks of line checks for an operator registered in Ireland, rotations that never touched French soil, a contract amendment signed in…
-

Ten knots too fast on final: calculating what it really costs in distance
The threshold is crossed ten knots above the approach speed, the crew sees it go by, and the sentence almost always follows:…
-

Mandatory or voluntary report: choosing the route according to what actually happened
A resolution advisory in cruise, followed immediately, no visible trace from the ground: at the debrief, the question always comes back in…
-

Representing the cabin in flight safety: a secondment still widely misunderstood
A report reaches the safety office: “trolley ran away on its own during a go-around, caught a few rows further down”. Three…
-

Crew mission contract: three clauses that turn against the contractor
The operator cancels the rotation thirty-six hours before the crew change: a salaried crew has become available again. The contractor, for his…
-

Occurrence coding: how a misapplied taxonomy silences the statistics
An operator notices a drift in its night-time runway excursions and asks for the series covering the last three years. The query…
-

Slats and flaps: what each one changes about maximum lift and stall angle of attack
In type rating training, « flaps lower the stall speed » goes down without difficulty. The next question trips people up: why does the…
-

Large forgings: the bottleneck that governs the final assembly rate
A final assembly line can turn out an aircraft in a few working days; the wing fitting that reacts the pylon loads,…