-

Nickel-based superalloys: the upstream dependency that engine rate makes visible
A high-pressure turbine blade quoted several quarters out, a spare disc that stalls an engine removal, a shop that answers “it’s the…
-

Buffer stock or just-in-time: the calculation that changed after the material shortages
The stores report coverage measured in weeks for a pylon fitting; the supplier quotes a lead time measured in quarters. Between the…
-

Tier 1 and Tier 2: where technical responsibility goes when the subcontractor subcontracts
A fitting cracks on several aircraft of the same fleet. The investigation traces the cause back to a heat-treatment batch processed by…
-

Qualifying a new material source: the test sequence that takes two years
A second prepreg source, quoted at the same areal weight and with the same resin, a far shorter lead time, and a…
-

Large forgings: the bottleneck that governs the final assembly rate
A final assembly line can turn out an aircraft in a few working days; the wing fitting that reacts the pylon loads,…
-

Fasteners and small critical parts: why a commonplace component halts a line
The fuselage section is ready, the operators are at their station, the tooling is calibrated, and nothing happens: a handful of two-centimetre…
-

Dual source or single source: what the manufacturer gains and loses by concentrating
A tier-2 forge shop shuts down — a fire, insolvency proceedings, an export control decision — and a few quarters later a…
-

Doubtful compliance documents: how a part with no history enters a fleet
A box arrives in stores: twelve hinge bushings in sealed bags, a broker’s delivery note, and a photocopy of an authorised release…
-

100% Synthetic Fuel Flights: What the Trials Prove, and What They Don’t
A demonstration flight takes off with both engines running on unblended synthetic kerosene, the news does the rounds of the newsrooms, and…
