-

Temperature margin and engine removal: how the shop visit date gets fixed
An engine rarely comes off because something broke. It comes off when a falling temperature margin, a life-limited part clock and a…
-

Shop Visit Workscope: How Time on Wing and Cost per Cycle Decide What Gets Opened
A workscope is written before anyone has seen the hardware, and it is a bet rather than a diagnosis. What separates a…
-

Operating in Abrasive Air: What Sand Takes From an Engine Before Its Time
Sand does not do one thing to a turbine, it does three, and only one of them washes off. How erosion, fouling…
-

Batteries and the Mass Budget: Why an Electric Aeroplane Always Lands at Its Maximum
A battery weighs the same empty as full, so take-off mass and landing mass become one number. That equality, not the advertised…
-

Daily Aircraft Utilization: The Number That Decides Your Maintenance Slots
Every planning review ends with the same question: Can we squeeze out another hour per day from the fleet? The answer is…
-

Exiting an Engine Support Contract: The Residual Value Nobody Priced
Signing a maintenance agreement per flight hour is like a purchasing decision: comparing the hourly rate, comparing the shop visit budgets, giving…
-

The Fan Drive Gearbox: How a Gearbox Architecture Changes Maintenance
A reduction gearbox between the low-pressure turbine and the fan is an aerodynamic decision before it is a mechanical one. But the…
-

Two spools or three: what turbofan architecture imposes on the engine shop
The shaft count of a large turbofan is an aerodynamic decision, and the shop pays for it. How compressor matching leads to…
-

From the Show Stand to the Cabin: The Test Chain a Seat Has to Survive
On a stand a seat is a shape and a weight figure. In a cabin it has been decelerated on a sled…
-

Predictive Maintenance on the Conference Slide: False Alerts and Data Rights
The conference slide shows the failure that was caught. It never shows the thousands of healthy aircraft-weeks the same detector had an…